Filter
Top Products
7
RADIO OPERATION
• SWITCHING TO RADIO MODE
Press MODE button (6) shortly to
select radio mode, the radio mode
appears in the display together with
the memory band and frequency.
• SELECTING THE FREQUENCY
BAND
At radio mode, press BAND/LOUD
(ENTER) button (13) shortly to select
the desired band.
The reception band will change in the
following order:
• SELECTING STATION
Press TUNE/TRACK/SKIP
button
(17) or TUNE/TRACK/SKIP button
(16) shortly to activate automatic seek
function. Press for several seconds
until “MANUAL” appears on the
display, the manual tuning mode is
selected. If both buttons have not
been pressed for several seconds, they
will return to seek tuning mode and
“AUTO” appears on the display.
• LOCAL/DISTANT
Press LOC button (1) to select
between local and distant stations.
Local setting for reception of strong
station, and a distant setting for
reception of weaker stations. This
function is effect during AUTO SEEK
operation.
• AUTOMATIC MEMORY
STORING & PROGRAM SCANNING
- Automatic Memory Storing
Press AMS/D-AUD button (14) for
several seconds, the radio searches
from the current frequency and
checks the signal strength until one
cycle search is finished. And then 6
strongest stations are stored into the
corresponding preset number
button.
- Program Scanning
Press AMS/D-AUD button (14)
shortly to scan preset station. When
the field strength level is more than
the threshold level of stop level, the
radio is holding at that preset number
for several seconds with release
mute, then searches again.
• STATION STORING
Press any one of the preset buttons
(18) (1 to 6) to select a station which
had been stored in the memory.
Press this button for several seconds
(until 2ND beeps come out), current
station is stored into the number
button.
• MONO/STEREO
Press MO/ST button (8) to select
mono or stereo mode. You can
sometimes improve reception of
distant stations by selecting mono
operation.
• SCAN
Press SCAN button (3) to set the
function to scan mode, which
scanning to higher frequency station
with receivable signal and keep on
each station for several seconds.
CASSETTE OPERATION
• SWITCHING TO TAPE MODE
If there is no tape inserted in the
cassette compartment:
Press OPEN button (7) to fold down
the front panel and show the cassette
compartment (26). Then insert the
tape into the compartment. The
cassette mechanism will load it in play
mode.
If a tape is already inserted in the
cassette compartment:
Keep pressing MODE button (6) shortly
until the tape mode display appears.
• PROGRAM BUTTON
These two buttons (25) perform the
dual functions of changing the
direction of tape playback and fast
forward/rewind of the tape.
- Change Tape Playback Direction
Press both buttons together to play
the other side of a tape.
- Fast Forward/Rewind
Press the button with the double
arrows pointing the same direction
as the direction indicator in the LCD
to fast forward; press other button in
the opposite direction to fast rewind.
• EJECT
When the front panel is folded down,
push the eject (
) button (24) down to
eject the cassette tape.
OPERATION
FM1 FM2 FM3 AM