PYLE Audio PLDVD65IN Car Stereo System User Manual


 
17
OPERATION
Remote Sensor
There is a remote sensor on the front
panel. On the monitor, there is another
remote sensor to receive remote control
signal. You can point the remote control
handset to the remote sensor on the front
panel (when the monitor doesn't stretch
out) or the remote sensor on the monitor
panel (when the monitor stretches out)
and press function keys on the remote
control to control the DVD unit.
The unit is also connected to an external
remote receiver (See the electrical
connection diagram above), and the
function is the same with the remote
sensor on the front panel or on the
monitor panel.
Notes:
The external remote receiver is placed
near the monitor for the best to
receiver remote signal easily.
If the angle of the monitor from vertical
exceeds (Especially the distance
exceeds 3m.), controlling the DVD unit
through the remote sensor on the front
panel cannot get good effect. You are
suggested to use the external remote
receiver
.
6.5 Inch TFT Display
When the monitor stretches out, the 6.5
inch color TFT display can show the
current state of the unit.
Volume Level Adjustment
Press VOLUME+/- on the monitor panel
of the unit or VOLUME +/- on the remote
control to increase or decrease the
volume level.
Mode Selection
press MODE button on the remote
control to select among DVD, AV1,
AV2 and RGB mode.
Reset
Reset button is placed on the front
panel and must be activated with either
a ballpoint pen or thin metal object. The
reset button is to be activated for the
following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not
operate.
- Error symbol on the display.
Picture mode Adjustment
Press PICTURE button on the monitor
panel, the picture mode will show on
the display, repeatedly press PICTURE
button to select among BRIGHT,
CONTRAST, COLOR, TINT (For the unit
with NTSC system) and SCREEN.
(For the unit with NTSC system):
Press VOLUME+/- buttons on the
monitor panel or VOLUME+/- buttons
on the remote control to adjust the
selected item. The corresponding value
will show on the display.
PICTURE
BRIGHT 32
CONTRAST 32
COLOR 32
TINT 32
SCREEN 16:9
30