Filter
Top Products
WideLine-8 System Configurations
-10º 0º +10º
Arrays can be assembled using only WL3082 line
arrays modules, with WL212-sw subwoofers at
the top of the array, or by utilizing the EB3082
extension bar, subwoofers can be flown behind
the main array.
Arrays of up to twelve WL3082 modules,
with four WL212-sw subwoofers flown behind
can be accommodated by the combination of
2 x AF3082-S small array frames and a single
EB3082 extension bar (Figure A). As many as
twelve WL3082 modules can be suspended
using one AF3082-S (Figure B) while the
AF3082-L large array frame can be used to
assemble arrays of up to 12 x WL3082 modules
alone or suspended below up to 4 x WL212-sw
subwoofers (Figure C). The AF8-10 adapter frame
(not shown) allows the user to add WL3082
WideLine-8 arrays beneath WL2012 WideLine-10
arrays. The PB3082 pullback bar (not shown) can
be used to attain extra down-angle in flown arrays
or as a suspension bar for arrays of up to eight
WL3082 modules.
Flexible Arrays
Figure A Figure B Figure C
WideLine-8 rigging doubles as an optimized ground stacking system. Using the WL212-sw subwoofer
as a base, arrays of WL3082 line array elements can be aimed downward by as much as ten degrees to
cover audience areas close to a stage, as well as upward by as much as ten degrees in order to better
cover distant balcony seating areas.
Optimized Ground Stacking