Filter
Top Products
14
PROBLEM SOLVING
If the satellite/TV/radio receiver does not operate correctly after you install the In-Line Signal Amplifier:
• Immediately unplug the power injector.
• Check all connections and compare them with the appropriate installation drawing(s) in
this manual.
If no problems are found in the connections:
Plug in the power injector and try the satellite/TV/ra-
dio receiver again. If possible, try a different satellite/TV/radio receiver with the system or try
the satellite/TV/radio receiver with a different antenna system.
If the above procedures do not resolve the problem:
Take the unit to your local RadioShack store
for assistance.
15-1170.fm Page 14 Tuesday, July 13, 1999 4:35 PM