Filter
Top Products
8
INSTALLATION
1. Determine the mounting location and drill four mounting holes (See Fig.1).
2. Attach the mounting bracket to the holes with the tapping screws (ø4x10).
3. Let the two levers aim at the slots on the DVD bracket to fix the display unit.
4. Open the monitor to display the five screw holes.
5. Attach the unit to the bracket with the mounting bolts (M 3.5x10).
6. Insert five rubber caps to the screw holes.
7. When the installation has completed, you can also turn the display upward or
downward, left or right to adjust the viewing angle. (See the arrowhead symbol in
Fig.2).
Fig. 1
Tapping Screws (ø4x10)
Mounting Bracket
Levers
DVD Bracket
Slots
Rubber Caps
Mounting Bolts (M3.5x10)
Fig. 2