Filter
Top Products
5
ELECTRICAL & AUDIO CONNECTIONS
Precautions
1. To prevent short circuits, be sure to disconnect the negative battery ground lead
before wiring the system up.
2. When you finish the installation, be sure to make one more check to be sure
everything is done correctly.
3. Reinstate all car parts that were removed.
4. Reconnect the negative battery ground lead.
Primary Wiring Descriptions
ELECTRICAL
12V
PRIME CONNECTION
BATTERY + Connect to the positive battery terminal
(constant + 12V source)
GROUND GROUND - Connect to the vehicle's chassis ground
(check for good ground)
REMOTE REMOTE B+(12V) Connect to the remote control wire(or the
electrical antenna) of the car radio/cassette
deck
HIGH PASS
OUTPUT
CROSSOVER MODULE
TO ANY AMPLIFIER
Connect from "high-pass output" of
CROSSOVER module to any amplifier input.
LOW PASS
OUTPUT
CROSSOVER MODULE
TO SUB-WOOFER
AMPLIFIER
Connect from low-pass sub-woofer output of
CROSSOVER to sub-woofer amplifier input.
INPUT RADIO/TAPE
PLAYER TO
CROSSOVER MODULE
Connect from pre-amp output of radio/tape
player (or CD) into
DESCRIPTION