Filter
Top Products
Chapter 2: Getting Started & Adjusting the Display 2-15
Customizing the
Screen Presentation
Options
Customizing the
Screen Presentation
Options
➤ To display the active waypoint:
1. Press the
SCREEN soft key.
2. Press the
WAYPOINT soft key to toggle the setting ON.
To return to the default soft key display, press
ENTER.
The standard radar picture is displayed again, with the active waypoint joined
to your vessel’s position by a dotted line. If the waypoint is off-screen, the
dotted line is extended to the edge of the radar picture.
Figure 2-7: Active Waypoint on a Radar Display
Custom Options - Chart mode
When chart details have been customized in the Chart Set Up menu (as
described in Section 7.7) the
SCREEN soft key can be used to switch the custom
chart options off or on:
When set to
ON, all chart options set to CUSTOM in the Customize Chart menu
are displayed; when set to
OFF, options set to CUSTOM are not shown.
The factory default for custom chart options is
ON.
➤ To switch the customized options on or off:
1. Press the
SCREEN default soft key.
2. Press the
CUSTOM soft key to toggle the setting from OFF to ON or from ON
to OFF.
To return to the default soft key display, press
ENTER.
SCREEN
WAYPOINT
OFF ON
D3989-2
Active waypoint
SCREEN
CUSTOM
OFF ON