Filter
Top Products
5
English
3. Remove the red liner. Press the adhesive strip onto one of the top corners of the back of
the antenna. Repeat for the other top corner. Then place a single mounting strip on the
metal section in the bottom middle of the antenna, with the strip facing down.
4. Remove the black liner for each strip.
5. Line up the antenna where you want to put it, then press it against the wall for 10
seconds.
6. Stop pressing the antenna against the wall and confirm that it’s firmly attached to the
wall. Then press an additional 30 seconds.
Important: The mounting strips have tabs that extend beyond the borders of the adhesive. Leave
these in place--they will allow you to remove the antenna without damaging your wall.