Filter
Top Products
Radio Operation
1. Choose A Radio Band
Press the BAND Button anytime to access
the radio function. The unit has one FM
Band and one AM Band. Each press of
the Band Button will change the radio from
one Band to the other.
2. Radio Tuning
In Radio Mode, turn the Radio Tuning
Knob to adjust the radio frequency. Press
and hold the button, and the radio will go
through the stations until you release the
button.
3. Mono / Stereo
Press the MO / INT button to change the
radio’s output from Mono to Stereo. This
function only works in Radio Mode.
CD Operation
1. Insert/Eject CD
Insert a disc into CD slot with label side
up. The disc will be automatically loaded
into the unit, even when it is off or at radio
mode. The word “LOAD” will blink on the
display and the CD will play automatically.
Press the EJECT Button to eject the disc
from the slot. When the disc is ejected,
the unit will automatically switch to radio
mode.
2. Selecting Tracks
On the Head Unit, press the >>| Button
to advance CD to the next track. Track
numbers will be shown on the display.
Press the |<< Button to go to a previous
track. Track numbers will be shown on the
display.
3. Play/ Pause CD
Press the Button to pause the CD. Press
this button again to resume playback.
4. Intro
Press the MO / INT Button to play the first
10 seconds of each track. Press this but-
ton again to when you find the track you
wish to play.
5. Repeat
Press the LOC / RPT Button to repeat
the same track continuously. “RPT” will
appear on the display. Press this button
again to stop repeating.
6. Random
Press and hold the LUD / RDM Button to
play all the tracks in random order. “RDM”
will appear on the display. Press and hold
this button again to stop random play.
Auxiliary Input
The Auxiliary Input Jack is on the right side
of the unit. Insert a 3.5mm stereo cable
into the Auxiliary Input Jack. Route the
other end of the stereo cable to the head-
phone jack of any portable audio device
such as a MP3 Player or DVD Player. Press
the AUX button to choose the Auxilary
Input Jack. Connect any portable audio
device such as a DVD player or VCD player
to the AUX IN cable. Use the volume con-
trol to adjust volume.
RCA Output
The RCA Line Out is on the back of the
unit. (Refer to Wiring Diagram) This output
is for connecting amplifier, equalizer, or
other audio componement that requires
a pre-amp out connection. (Red = Right,
White = Left)
Follow the manufacturers instructions for
the audio component that you are con-
necting.
10