Filter
Top Products
Rosen T8 Quick Reference Card
Speaker Sound
RES PN 9100521-90
TM
a. Press the SPEAKER on the
remote control or FMM on the
control panel. “SPEAKER SOUND”
will appear on the screen as
shown at right.
b. Turn the vehicle’s radio on, and
tune to the FM frequency set by
the installer (see Owner’s Manual
for more detail).
USE THE HEADPHONES
a. Turn on by pressing the ON/OFF button,
located on the ear piece. The power
LED on the ear piece should illuminate -
if not, check that the batteries have a
charge and are inserted properly.
b. Turn down the volume knob on the ear
piece. Put over ears and re-adjust volume.
Power ON/Off
switch
Volume Knob
Power LED
Adjust Size Here
Note: The headphones must have a clear
line of sight to the T8 screen to operate
properly.