Samson RSX115 Car Speaker User Manual


 
8
Using Speaker Stands - RSX115
The RSX115 features a standard 1
3
8" pole mount receptacle, which enables the speaker to be
mounted on a standard tripod stand or subwoofer satellite pole. For best results raise the speak-
ers above the heads of the listening audience.
When mounting a speaker onto any stand, always ensure that the stand is on a flat, level sur-
face, with the legs fully extended. Be sure to check that the maximum load weight for the
stands is greater than the weight of the RSX115. Never use a stand with a maximum load
weight lower than the RSX115. Do not attempt to mount more than one speaker on a stand at
one time. The RSX loudspeakers are heavy, unless you feel confident that you can handle lifting
the weight of the cabinet, you should ask for a second person to help place the cabinet on a
stand.
When the speaker is placed on the stand, always check the integrity and center of gravity of the
system. If the speaker can be tipped easily, or the pole is swaying, it is recommended to lower
the height of the stand. Position the stand and route cables so that the performers and the
audience can not tip over or trip on the system.
RSX115 mounted on a tripod stand RSX115 mounted on a subwoofer
satellite pole