Samson SARSX110 Car Speaker User Manual


 
9RSX Passive Loudspeakers
Basic Set Up
The RSX loudspeakers are passive cabinets, which means that they need to be connected to a
power amplifier to reproduce an audio signal. Each speaker cabinet features parallel connectors
which enable each cabinet to be daisy chained to an additional loudspeaker. When connecting
multiple speakers to a power amplifier or powered mixer, you must pay attention to the mini-
mum load impedance of the amplifier. Most amplifiers can safely provide power to loudspeakers
with a minimum load impedance of 8 or 4 ohms. The RSX loudspeakers are rated at 8 ohms.
This means if two RSX cabinets are wired in parallel, the nominal impedance of the speaker
system will be 4 ohms.
Right Output
Mono/Sub Output
Left Output
115V 60Hz, 1900W
SX 1800
400 W
600 W
1+1-
1+2+
2+2-
1+1-
E251753
23FY
115V 60Hz, 1900W
SX 1800
400 W
600 W
1+1-
1+2+
2+2-
1+1-
E251753
23FY