The CD function is automatically selected when Disc Skip is
pushed.
To select a specific disc, press the corresponding Disc (1, 2, 3) button
on the front panel or Disc Skip on the remote control, until the
required disc indicator flashes.
Result: All the discs will be played in turn, starting with the one selected.
If you wish to play the current disc only, press CD Repeat on
the front panel one or more times, until 1 CD is displayed.
If you use the Disc (1, 2, 3) function when listening to the
radio or to a tape, the system switches automatically to the CD
mode.
If the disc selected is not loaded, the next disc is played
automatically.
You can select the track you wish to listen to, either when the
compact disc player is stopped or when a disc is playing.
To start playback at the beginning of the... Turn the Multi Jog knob...
Next track One notch to the right
Current track One notch to the left
Previous track Two notches to the left
Track of your choice The appropriate number of
notches to the right or to the left
You can also use the and buttons on the front panel, or
the and buttons on the remote control to select a track.
12
Selecting a CD in the Disc changer
Selecting a CD Track
GB
To move the title(Album),
If ‘Title’ is selected,
Turn the Multi Jog Knob.
To move the track,
press the
,
button.
Moves the track within the title.
If the
,
button is pressed
more than the number of tracks
within the title, it moves to the next title.
The title and track of the MP3-CD desired to listen may be
selected on stopping or during playbacks.
To select the MP3-CD title and
track
Main Unit
Press the Tune/CD Mode button, then select MP3-CD ‘Title’ or ‘Track’ and
press the , button.
If ‘Title’ is selected in the display, the title moves.
If ‘Track’ is selected in the display, the track moves.
Remote Control
2
3
1
Title Movement
Track Movement
MAX-ZS720 GB n(S) 1~17 2/26/03 2:40 PM Page 12