Sangean Electronics RCR-5 Car Satellite Radio System User Manual


 
11
24/12 hours format, AM, FM frequency
step setting
1. Press and hold the BAND button for 6 second until you hear
the beep, and the display will flash the current 24/12 hr format.
Press the TUNING up/down button to select 24 hr (military hr)
or 12 hr format.
* After the 24/12 hour format setting, if you don’t wish to make
any change on tuning frequency step, please press the BAND
button for 2 times (you will hear the beep for each time),
then the display will go back to the clock. If you wish to
change the tuning frequency step, follow the next steps:
2. Press the BAND button again, and it will beep and flash the
FM frequency tuning step. If you wish to change the FM
frequency step, press the TUNING up/down button to select.
a. If this radio was bought in USA, the FM tuning step selections
are 100KHz/step and 200KHz/step.
b. If this radio was bought in Europe, the FM tuning step
selections are 50KHz/step and 100KHz/step.:
If you don’t wish to make any change, don’t press the
TUNING up/down button.
3. Press the BAND button again, and it will beep and flash the
AM(MW) frequency tuning step. Press the TUNING up/down
button to select 9KHz/step or 10KHz/step.
10kHz/step should be selected when you are in Europe.
9kHz/step should be selected when you are in USA.
4. Press the BAND button to complete the setting.