Sharp LC-50LM652E Car Video System User Manual


 
Connecting external devices
NOTE
In cases when the decoder needs to receive a signal from
the TV, make sure you select the appropriate input terminal
to which the decoder is connected in “AV selection” (Page
17).
SCART connection
Example of connectable devices
VCR
Decoder
DVD player/recorder
Speaker/amplifier connector
Connect an amplifier with external speakers as shown
below.
Example of connectable devices
Connecting an amplifier with digital audio
input
After connecting
Digital audio output setting
After connecting an amplifier with RCA digital audio
input as shown, you should set an audio output
format compatible with the programme you are
watching or the device connected.
Press MENU and go to Setup Sound
SPDIF mode select PCM or Dolby
Digital.
NOTE
• When you set this to Dolby Digital, and you
receive the Dolby Digital or Dolby Digital Plus audio
formats, Dolby Digital audio is output. Otherwise,
PCM audio is output.
When you set this to PCM, PCM audio is output
no matter what audio formats you receive.
43
SCART cable
Decoder
RCA Audio cable
Amplifier with RCA
digital audio input
SCART (AV/RGB/S-VIDEO)