Sharp PN-465E Car Video System User Manual


 
34
E
Specifications
Product Specifications
Model PN-465E
LCD element 46" wide (116.8 cm diagonal) ASV low-reflection black TFT LCD
Max. resolution (pixels) 1920 x 1080
Max. colours 16.77 M colours (8 bits/colour)
Pixel pitch 0.53025 mm (H) x 0.53025 mm (V)
Vi
ewing angle 176° right/left/up/down (contrast ratio ≥ 10)
Screen active area (mm) 1018.1 x 572.7
Computer input signal Digital (DVI 1.0 standard-compliant), Analogue RGB (0.7 Vp-p) [75 ]
S
ync signal Horizontal/vertical separate (TTL: positive/negative), Sync-on-green,
Composite sync (TTL: positive/negative)
Vi
deo colour system PAL, PAL-60, SECAM, NTSC (3.58 MHz), NTSC (4.43 MHz)
Plug and play VESA DDC2B
Power management VESA DPMS, DVI DMPM
Input terminals PC/AV Digital DVI-D 24 pin (HDCP compatible) x 1
PC Analogue Mini D-sub 15 pin, 3 rows x 1, BNC
*1*2
x 1
Audio 3.5 mm mini stereo jack x 1
AV
Composite video BNC x 1
Component BNC (Y, Cb/Pb, Cr/Pr)
*1
x 1
Audio RCA pin (L/R) x 1
Serial (RS-232C) D-sub 9 pin x 1
Output terminals PC/AV Digital DVI-D 24 pin x 1
*3
Audio RCA pin (L/R) x 1
Serial (RS-232C) D-sub 9 pin x 1
Speaker 7 W + 7 W [6 ]
Power requirement AC 100 V - 240 V, 50/60 Hz
Operating temperature 0°C to 40°C
Operating humidity 20% to 80% (no condensation)
Power consumption 266 W (Input signal waiting mode: 7 W, Standby mode: 4 W)
Dimensions (mm) Approx. 1,113 x 140 x 657 (excluding protrusions)
Weight (kg) Approx. 35.5 (excluding the temporary stand)
*1 Cannot be used simultaneously.
*2 Does not support plug and play.
*3 Connection is allowed with an HDCP-compatible device only. Does not support Repeater control function.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product imporovement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units
.