Sharp PN-E802 Car Video System User Manual


  Open as PDF
of 28
 
8
E
• Wheninstalling,removingormovingthemonitor,ensurethatthisiscarriedoutbyatleast6people.
• Besuretouseawall-mountbracketdesignedordesignatedformountingthemonitor.
• Thismonitorisdesignedtobeinstalledonaconcretewallorpillar.Reinforcedworkmightbenecessaryforsomematerials
suchasplaster/thinplasticboard/woodbeforestartinginstallation.
Thismonitorandbracketmustbeinstalledonawallwhichcanendureatleast4timesormoretheweightofthemonitor.
Installbythemostsuitablemethodforthematerialandthestructure.
• ToattachaVESA-compliantmountingbracket,useM6screwsthatare5/16inch(8mm)to3/8inch(10mm)longerthanthe
thicknessofthemountingbracket.
• Whenmovingthemonitor,besuretoholditwiththehandles,theunitbottomandthesideofunit.DonotholdtheLCDpanel
orcorners.Thismaycauseproductdamage,failure,orinjury.
• Aftermounting,pleasecarefullyensurethemonitorissecure,andnotabletocomeloosefromthewallormount.
• DonotuseanyscrewholesotherthanVESAholesforinstallation.
n
Removing the temporary stand used in the package for transportation
Caution
• Thetemporarystandusedinthepackagefortransportationisonlyforusewiththismonitor.Donotuseitforanyother
devices.
1. Spread a soft thick cloth (such as a blanket) on a stable level surface on which the entire monitor can be placed, and
place the monitor on it with the screen facing down.
2. Remove the stand xing screws and then remove the stand.
3. Attach the cover (supplied) onto the back of the monitor.
Secureusing2coverscrews(M4withwashers)(supplied).
Cover screws
(M4 with washers)
(supplied)
Cover screws
(M4 with washers)
(supplied)
Model PN-E802
Powerrequirement AC100V-240V,3.1A,50/60Hz
Operatingtemperature
*
32°Fto104°F(0°Cto40°C)
Operatinghumidity 20%to80%(nocondensation)
Powerconsumption(Maximum) 265W[WhenPN-ZB01(optional)isattached:270W]
Dimensions(excludingprotrusions) inch(mm)
Approx.73-9/16(W)x4-13/16(D)x43-1/16(H)(1869x123x1094)
Weight lbs.(kg)
Approx.174.2(79)(excludingthetemporarystandusedinthepackage
fortransportation)
[PN-ZB01(optional):
Approx.
1.102(0.5)]
* Temperatureconditionmaychangebysettingupcondition.
TemperatureconditionmaychangewhenusingthemonitortogetherwiththeoptionalequipmentsrecommendedbySHARP.Insuch
cases,pleasecheckthetemperatureconditionspeciedbytheoptionalequipments.
Asapartofourpolicyofcontinuousimprovement,SHARPreservestherighttomakedesignandspecicationchangesforproductimprovement
withoutpriornotice.Theperformancespecicationguresindicatedarenominalvaluesofproductionunits.Theremaybesomedeviationsfrom
thesevaluesinindividualunits.
Specications
Mounting Precautions (For SHARP dealers and service engineers)
 previous next