Filter
Top Products
SX68N7_11-15_EN FLE (Malaysia) Sdn. Bhd.
E 15
Dimension: 176 x 250 mm
Channel setting
Enables individual channel setting.
MENU
PICTURE
SOUND
FEATURE
TIMER
CH-SETTING
1 Press
MENU
to call MENU
screen.
2 Press
CH
/
CH
to
select “CH-SETTING”.
ON
OFF
168.
25M
H
Z
CH27
AUTO
CH-SETTING
POSITION
COLOUR
SKIP
FINE
A2
CH
SELECT
ADJUST
MENU
RETURN
TV
TV/VIDEO
MPX
POWER
SAVE
AV MODE
MENU
NORMAL
1
23
4
56
7
8
0
9
CH
CH
MENU
CH
CH
3 Press / to
display CH-SETTING menu.
4 Press
CH
/
CH
to
select desired setting.
5 Each time you press /
, setting for individual
items changes as follows:
• POSITION
The channel position changes to the higher or lower number.
• COLOUR
• SKIP
ON
OFF
Channel numbers with a “
” mark on the left are set to SKIP. To turn
off SKIP, press the number buttons to select the desired channel and
then set “SKIP” to “OFF”.
• FINE
The frequency changes to allow fine tuning.
• A2 stereo system
ON (A2 stereo sound)
OFF (Monaural TV sound)
• Switching COLOUR system:
Set the system to “AUTO” for normal TV reception. The AUTO mode automatically detects the receiving signal
system and changes the reception system of the TV set. When the picture is not stable, switching to an
appropriate system may improve the picture quality.
• In a weak reception area, or under bad reception conditions, you can change the frequency for fine tuning.
• When using FINE, the channel number changes from green to yellow.
• To return the channel to its original frequency setting, follow the manual channel tuning procedure. See
13
.
6 Press
MENU
until normal
screen appears.
• When you select AV1, AV2 or AV3
for the channel position, the CH-
SETTING menu changes as shown
on the right and the colour mode
changes in the following order:
AV1
AUTO
CH-SETTING
POSITION
COLOUR
CH
SELECT
ADJUST
MENU
RETURN
AUTO PAL N443 N358
Settings and adjustments
AUTO PAL