Filter
Top Products
6
Specifications
Connector Type
BNC, Female
Impedance
50 Ω
Power Requirements
[1]
10 to 15 V DC bias from coaxial connection, 75 mA
RF Frequency Range
UA864US
470–698 MHz
UA864LO
470–698 MHz
UA864HI
530–790 MHz
UA864A
650–952 MHz
Reception Pattern
3 dB Beam Width at center frequency
UA864US
100 degrees
UA864LO
100 degrees
UA864HI
95 degrees
UA864A
90 degrees
Third-order Overload Intercept Point (OIP3)
>30 dBm
Antenna Gain
On Axis, 0 dB Gain Setting at center frequency
UA864US
2.5 dBi
UA864LO
2.5 dBi
UA864HI
3.0 dBi
UA864A
5.5 dBi
Signal Gain
±1 dB, Switchable
+10 dB
0 dB
−10 dB
−20 dB
RF Overload LED Threshold
−15 dBm
Dimensions
176 x 176 x 51 mm (H x W x D)
Weight
487 g (17.2 oz.)
Operating Temperature Range
−7°C (20°F) to 49°C (120°F)
Storage Temperature Range
−29°C (-20°F) to 74°C (165°F)
[1]
−20, −10, 0 dB settings do not require power
Antenna Cables from Shure
Shure offers the following pre-terminated antenna cables:
Length Type Model No.
6 foot RG58 UA806
10 foot RG58 PA725
25 foot RG8X UA825
50 foot RG8X UA850
100 foot RG213 UA8100
Certifications
This product meets the Essential Requirements of all relevant European
directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from: www.shure.com/
europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: 49-7262-92 49 0
Fax: 49-7262-92 49 11 4
Email: EMEAsupport@shure.de