21
Handling and operation
Bluetooth Car Radio KH 2376
GB
Switching On and Off
Press briefl y the POWER/DIM button to switch the device on. In the display
the notice WELCOME appears.
Briefl y touch the POWER/DIM button to dim the display illumination.
T
o switch off hold down the POWER/DIM button longer
.
Settings
WARNING
Hearing damage as a result of too high a volume!
If the volume is set too high it can lead to permanent hearing damage.
Set the volume to moderate levels only. ►
Volume
Turn the multi controller to set the volume.
Bass/Treble/Balance/Fader
Press the SEL button. The current volume level is shown. Each further press of
the SEL button accesses the next setting point.
The following settings are possible:
VOL - Volume (from 0 to 45),
BAS - Bass (from -7 to +7),
TRE - Treble (from -7 to +7)
BAL - Balance (sound distribution between the right and left speakers)
(from 8L to 8R)
FAD - Fader (sound distribution between the rear and front speakers)
(from 8R to 8F)
Turn the multi controller to change the settings of the displayed menu items.
further settings with the SEL button
Hold down the SEL button for approx. 2 seconds and then press the SEL
button repeatedly until the desired function is shown in the display.
INVOL - switch on volume
Turn the multi controller to set the volume level, with which the device is to be
set when turned on.
B_KH2376_33301_LB4A indb Abs3 21 17 07 2009 14 13 54 Uhr