Filter
Top Products
[ Operation ]
58
Troubleshooting
Symptom Solution
Stiletto 10 does not
power on
Check the battery to be sure it is installed correctly.
Charge the battery.
Stiletto 10 displays:
Acquiring Signal
The Stiletto 10 is searching for a satellite signal.
Check for obstacles over or around the satellite antenna.
Change your location to eliminate nearby obstacles such as build-
ings, overhangs, bridges, overpasses, etc.
Audio starts and stops The satellite signal is weak.
Check for obstacles over or around the satellite antenna.
Change your location to eliminate nearby obstacles such as build-
ings, overhangs, bridges, overpasses, etc.
No sound Check that the ear buds or antenna headphones are plugged in
correctly and securely.
The Stiletto 10 will not
start up or displays
ERROR
The software on the Stiletto 10 has been damaged. Connect the
Stiletto 10 to your PC computer using the USB cable, and use
the My Sirius Studio software to download new software to the
device. Follow the instructions included on the software CD-ROM.
The Stiletto 10 does
not respond to the
Media Dial and other
buttons
The Stiletto is locked. Slide the Power/Lock switch to the
center position.
Slide and hold the Power/Lock switch down for 5 seconds
which will turn the Stiletto 10 off. Then slide the Power/Lock
switch down and release it.
If none of these solutions works, remove the battery, wait 10
seconds, replace the battery, and slide the Power/Lock switch
down and release it.