Filter
Top Products
5
SIR-ALP10T Operation and Installation Guide
4
SC-H1 SIRIUS Connect Tuner Installation Guide
5
SC-H1 SIRIUS Connect Tuner Installation Guide
WARNING
This symbol means important
instructions. Failure to heed them can
result in serious injury or death.
Any function that requires your prolonged
attention should only be performed after
coming to a complete stop. Always stop the
vehicle in a safe location before performing
these functions. Failure to do so may result
in an accident.
DO NOT OPEN, DISASSEMBLE OR
ALTER THE UNIT IN ANY WAY. Doing so
may result in fire, electric shock or product
damage.
DO NOT INSERT ANY OBJECTS INTO
THE UNIT. Doing so may result in fire,
electric shock or product damage.
MAKE THE CORRECT CONNECTIONS.
Failure to make proper connections may
result in fire or product damage.
DO NOT SPLICE INTO A ELECTRICAL
CABLES. Never cut away cable insulation
to supply power to other equipment. Doing
so will exceed the current carrying capacity
of the wire and result in fire or electric
shock.
DO NOT INSTALL THE UNIT IN AREAS
WHERE THERE ARE HIGH LEVELS OF
HUMIDITY, MOISTURE OR DUST. Doing so
can result in electric shock or product
failure.
FCC Warning: This equipment may
generate or use radio frequency energy.
Changes or modifications to this equipment
may cause harmful interference unless the
modifications are expressly approved in this
User Guide. The user could lose the
authority to operate this equipment if an
unauthorized change or modification is
made.
Note: This equipment has been tested and
found to comply with Part 15 of the FCC
Rules. These rules are designed to provide
reasonable protection against harmful
interference. This equipment may cause
harmful interference to radio
communications if it is not installed and
used in accordance with these instructions.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one of more of the following measures:
• Relocate the receiving antenna.
• Consult the dealer or an experienced
technician for help.
CAUTION
This symbol means important
instructions. Failure to heed them can
result in injury or material property
damage.
HALT USE IMMEDIATELY IF A PROBLEM
APPEARS. Failure to do so may cause
personal injury or damage to the product.
Return the tuner to your authorized retailer
or nearest service center for repairing.
INSTALL THE WIRING SO THAT IT IS NOT
CRIMPED OR PINCHED BY SCREWS OR
SHARP METAL EDGES. Route the cables
away from moving parts or sharp pointed
edges. This will prevent crimping and
damage to the wiring. If the wiring must
pass through a metal hole, be sure to use a
rubber grommet to prevent the wire’s
insulation from being cut by the metal edge
of the hole.
USE THE SPECIFIED ACCESSORY
PARTS AND INSTALL THE PRODUCT
SECURELY. Be sure to use only the
specified accessory parts. Use of non-
specified parts may damage this unit
internally or may not securely install the unit
in place. This may cause parts to become
loose, resulting in hazards or product
failure.
Installation
It is recommended that prior to starting the
installation, you read this installation section
completely and follow the instructions. In
addition, consult the manual of the audio
device to which you will be connecting the
SC-H1 Tuner to determine the required
installation configuration:
• If power for the SC-H1 Tuner is not
provided by your audio device via the
DIN cable connection, you will need to
use the provided AC Power Adapter to
provide power for the SC-H1 Tuner.
• If audio input from the SC-H1 Tuner is
not suported via the DIN cable
connection of your audio device, you
will need to connect the audio output of
the SC-H1 Tuner to your audio system
via the RCA-type or Optical audio
output connectors of the tuner. (You
will need to purchase the appropriate
cable separately.)
Mounting the SC-H1 Tuner
Consider the mounting location carefully to
be sure that you avoid the following:
• Any location where the tuner is
exposed to moisture.
• Any location where the tuner is
exposed to extreme heat.
The tuner may be mounted on a wall with
#10 screws, using the slots on the
underside of the tuner to hang on the tuner
on the screws. Alternately, the tuner may
placed on any flat surface.
Installing the Antenna
Proper installation of the windowsill antenna
is important for consistent satellite signal
reception.
For correct operation and best reception of
the SIRIUS signal, it is important that the
1
2
3
4
5
HORIZON
SKY
SOUTH
WEST EAST
NORTH
SCREW
MOUNTING SLOTS