Filter
Top Products
9
SIR-ALP1 Operation and Installation Guide
9
SIR-ALP1 Installation Guide
Antenna (21’ cable) - Mount on
Roof of Vehicle
Power
Harness
Black – Connect to Chassis Ground
2.5-meter Ai-NET Cable (Connect
to Alpine SAT Ready Headunit or
Signal Processor)
Yellow – Connect to Battery Positive
Right-angle SMB
Connector
Note: It is important to follow the Input/Output configuration of the Ai-NET system. The
directionality is in reference to the Audio Path.
Gray Ai-NET connectors are Audio Input
Black Ai-NET Connectors are Audio Output. (Exception is the connector on an Alpine
Headunit – it can be either Input or Output depending on the position of the Ai-NET switch on
the bottom of the unit.