Filter
Top Products
13
SIR-SNY1 Operation and Installation Guide
13
SIR-SNY1 Installation Guide
Basic Operation
Listening to a program
The Sirius receiver is controlled by the
master unit. Button locations vary with
different master unit models. Please
refer to the master unit instruction
manuals.
1. To select Sirius
a. Press the Source button until “Sirius”
or “XM” is displayed
- or -
b. Press the Source button until “MD” is
displayed, then press the Mode
button to Select SIRIUS. For master
units which can control more than
one MD changer, press the Mode
button repeatedly (the display will
show “MD1”, “MD2”, etc.) until the
receiver is found.
2. Press either Seek button to select the
desired channel. Pressing and holding
the Seek button will quickly step through
the channels.
Note: “LOADING” is indicated while the
receiver is reading the information.
Display items
A variety of Sirius Satellite Radio
program information (channel name,
artist name, song title) is available on
the display.
Press the Display (DSPL) button.
Each time you press the Display
button, the items cycle as follows:
Channel Name - Artist/Program Name -
Song Title...
Storing favorite channels
You can preset up to 20 channels.
1. Tune in a channel that you want to
store.
2. Press the Shuffle (SHUF) button.
The radio will show a list of presets,
starting with preset 1. The channel
number will be shown if a preset has
already been stored. With some
master units, the Shuffle button is only
equipped on the remote control.
3. Press the Disc/Preset button to
select a preset number. With some
master units, the Disc/Preset button is
only equipped on the remote control.
4. Press the Disc/Preset + (Disc +) button
for two seconds. The display shows
“MEMORY” if the radio successfully stores
the channel into the preset. The display
shows “FAILURE” if the radio fails to store
the channel into the preset. The radio
automatically returns to the normal mode
if there is no key pressed within five
seconds.
Auto Scroll
If available, it is recommended that you
turn on the Auto Scroll feature in your
radio. This will ensure that you will be
able to view all of the available artist and
song title information. Please refer to the
master unit instruction manuals for
information on activating this feature.