Filter
Top Products
SA-NS500 4-295-602-31(1)
Indicator Green Amber Red None
I/ (ON/Standby)
Lit:
In operation
Flashing:
During starting-up
Lit:
In network standby mode
Lit:
In standby mode
Flashing:
In protection mode
Press I/ (ON/Standby) button or set the OPERATE
ON/OFF switch to OFF, then set it to ON again. If the
symptom recurs, consult your nearest Sony dealer.
– OPERATE ON/OFF switch is set
to OFF
– Drained battery condition
LINK
Lit:
During wireless connection
Cycle of flashing for 2 sec
and dark for 1 sec:
Begins wireless connection
Lit:
During wired connection
Cycle of being lit for 2 sec
and dark for 1 sec:
Begins wired connection
Lit:
An error has occurred (with
the wireless LAN setting/ not
connected)
Cycle of flashing 4 times in 1
sec:
A wireless LAN WPS error has
occurred
A wireless network setting process
is not finished
What can be done with your device and this Network Speaker
You can set up the Network Speaker using any of the following devices:
Indicator information
iPhone/iPod touch/iPad
or Mac
Android phone
or tablet
Windows PC
Using AirPlay to send music
Using iTunes to play music
Accessing the Internet music streaming such as
Music Unlimited
Using your iPhone/iPod touch/iPad instead of the
remote control
Accessing the Internet music streaming such as
Music Unlimited
Controlling music playback with your Android device
Using your Android device instead of the remote
control
Playing your music stored on a PC with your Network
Speaker
If the OS of your PC is Windows 7
Using your PC as both server and controller (and the
[Play To] function arrows you to listen to music easily)
For more information and instructions, visit http://www.sony.net/sans
Indicator
White
Blue None
Illumination
Lit:
– In Playback mode
– In selecting audio input
Cycle of flashing at 1 sec:
In preparation for playback
Cycle of flashing twice in 1 sec:
In pause mode
Cycle of flashing 4 times in 1 sec:
An error has occurred
Lit:
In stopped Playback mode
Cycle of flashing twice in 1 sec:
During transition to Standby mode
– In Standby mode
– During updating
– OPERATE ON/OFF switch is set to OFF
– Drained battery condition
/ Flashing: During starting-up
To update the software
When a new update is available, the UPDATE indicator is lit in green while the unit is
connected to the Internet. Press and hold the UPDATE button until the illumination is
turned off.
To reset the speaker
The previously registered settings or information can be reset.
Press the ALL RESET button on the bottom of the unit with a pointed object (such as a
small pin) until all indicators light.
UPDATE
Rear
ALL RESET
Bottom
AirPlay, the AirPlay logo, iPhone, iPod touch, and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries. iPad is a trademark of Apple Inc.
Top
Rear
Illumination
I/
Link