Filter
Top Products
22
GB
COAXIAL
AUDIO OUT
S VIDEO OUT
OPTICAL
DIGITAL IN
OPTICAL
DIGITAL IN
OPTICAL
(CD ONLY)
AUDIO IN
S VIDEO IN S VIDEO
AUDIO IN AUDIO IN
S VIDEO IN
AUDIO
OUT
FRONT CENTER SURROUND
R
+
–
+
–
+
–
+
–
L
RL
RL
RL
AM
L
R
FM
75Ω
ANT
SPEAKERS
IMPEDANCE USE 6–16Ω
SUB
WOOFER
YP
B
/C
B
P
R
/C
R
VIDEO
TV/SAT TV/SAT
MD/DAT
AUX
DIGITAL OUT
COMPONENT VIDEO OUT (DVD ONLY)
MONITOR OUT
R
S VIDEO
IN
S VIDEO
IN
AUDIO
IN
L
IN INOUT OUT OUT
OUTPUT
INPUT
OPTICAL
R
L
S VIDEO
IN
AUDIO
IN
R
L
S VIDEO
IN
AUDIO
IN
If you connect a digital satellite receiver with the TV/SAT (OPTICAL DIGITAL IN)
jack
The digital satellite receiver can be connected to the TV/SAT (OPTICAL DIGITAL IN) jack
instead of the TV/SAT (AUDIO L/R IN) jacks of the system.
The system can accept both the digital and analog signals. Digital signals have priority over
analog signals. If the digital signal ceases, the analog signal will be processed after 2 seconds.
If you connect a digital satellite receiver without the TV/SAT (OPTICAL DIGITAL
IN) jack
Connect the digital satellite receiver to the TV/SAT (AUDIO L/R IN) jacks only of the system.
Setup for the system (for Asian models)
Setup is necessary for the system, depending on the TV monitor to be connected.
The initial setting for Asian models is NTSC.
If the colour system of the TV is PAL*
To set the system to PAL, turn on the system by pressing [/1 on the remote while pressing X
(pause) button on the system. You need to hold the X button until AVD-S10 appears on the
display. To reset to NTSC, turn off the system and then turn on again using the remote while
pressing the X button on the system.
*If the colour system of the TV is NTSC, do the same operation above to set the system to
NTSC.
Connecting the AC Power Cord (mains lead)
Before connecting the AC power cord (mains lead) of this system to a wall outlet (mains),
connect the speakers to the system (see page 17).
Connect the AC power cord (mains lead) of your TV/video components to a wall outlet (mains).
VCR Digital satellite receiver TV monitor