Sony BKAM-102 Car Speaker User Manual


 
1-2(E)
AMS-100
1-2. Dimensions
1-3. Installation of Boards
The optional boards (BKAM-101/102/103) can be installed in any slots of the AMS-100.
Installation of optional boards
350
5
424
465
482
Unit : mm
1-2. Dimensions
1-3. Installation of Boards
1. Turn off the power of the AMS-100.
2. Remove the blank panel on the rear panel after
removing its two retainer screws.
n
Do not discard the removed blank panel.
3. Slide the optional board along the guide rails into the
unit.
4. Secure the optional board in the AMS-100 with the
screws supplied with the optional board.
n
If there is any unused slot without a cover, install the
cover you have just removed there.
B 3x5
B 3x5
Blank panel
BKAM-101, BKAM-102, BKAM-103