14
EN
With Optional Equipment
CD/MD Changer
You can control up to 7 CD and MD changers
with this unit.
Playing a CD or MD
1 Press (SOURCE) repeatedly to select CD
or MD.
2 Press (MODE) until the desired changer
appears (for example: CD2 or CD3).
CD/MD playback starts.
When a CD or MD changer is connected, all
the tracks play from the beginning.
Changing the displayed items
Each time you press (DSPL) during CD/MD
playback, the item changes as follows:
$
Elapsed playback time
$
Disc name*
1
$
Track name*
2
$
Clock*
3
$
MOTION DISPLAY*
4
*
1
If there is no prerecorded name for a CD or MD,
“NO NAME” appears in the display.
*
2
If the track name of an MD is not prerecorded,
“NO NAME” appears in the display.
*
3
If the dual information function is on, the clock
does not appear in the display.
*
4
All the items above are scrolled in the display
one by one in order.
Tip
If the name of the MD is too long, you can scroll it
across the display window by pressing (SHIFT),
then (1) (N).
Boosting bass sound — D-bass
You can enjoy clear and powerful bass sound.
The D-bass function boosts the low frequency
signal with a sharper curve than conventional
bass boost.
You can hear the bass line more clearly even if
the vocal sound is the same volume. You can
emphasize and adjust the bass sound easily
with the D-BASS dial. This effect is similar to
the one you get when you use an optional
subwoofer system.
Moreover, the Digital D-bass* function creates
even sharper and more powerful bass sound
than Analog D-bass.
* Digital D-bass is available during CD playback.
Adjusting the bass curve
Turn the D-BASS dial to adjust the bass
level (1, 2 or 3).
“D-BASS” appears in the display.
During CD playback, “DIGITAL D-BASS”
appears in the display.
To cancel, turn the dial to the OFF position.
Note
If the bass sound becomes distorted, adjust the D-
BASS dial or volume control.
Digital D-BASS
0dB
D-BASS 3
D-BASS 2
D-BASS 1
0dB
D-BASS 3
D-BASS 2
D-BASS 1
Level
Analog D-BASS
Level
Frequency (Hz)
Frequency (Hz)