Filter
Top Products
21
5 Rotate the control dial to select the
subwoofer position from “NEAR,”
“NORMAL” or “FAR,” then press it.
6 Press (BACK).
To cancel listening position, select “OFF”
on step 3.
Adjusting the listening
position
You can fine-tune the listening position
setting.
1 During reception/playback, press the
select button.
2 Rotate the control dial until “ADJ
POSITION” appears, then press it.
3 Rotate the control dial to adjust the
listening position, then press it.
Adjustable range: “+3” – “CENTER” –
“–3.”
4 Press (BACK).
DM+ Advanced
DM+ Advanced improves digitally
compressed sound by restoring high
frequencies lost in the compression process.
1 During playback, press the select
button.
2 Rotate the control dial until “DM+”
appears, then press it.
3 Rotate the control dial to select “ON,”
then press it.
4 Press (BACK).
Tip
The DM+ setting can be memorized for each
source.
Using rear speakers as
subwoofer — Rear Bass
Enhancer
Rear Bass Enhancer enhances the bass
sound by applying the low pass filter setting
(page 23) to the rear speakers. This function
allows the rear speakers to work as a
subwoofer if one is not connected.
1 During reception/playback, press the
select button.
2 Rotate the control dial until “RB ENH”
appears, then press it.
3 Rotate the control dial to select from
“1,” “2” or “3,” then press it.
4 Press (BACK).