Filter
Top Products
17
Customizing the equalizer curve
— EQ3 Tune
“Custom” of EQ3 allows you to make your own
equalizer settings.
1 Select a source, then press the select
button.
2 Rotate the control dial to select “EQ3
parametric,” then press the select
button.
3 Rotate the control dial to select
“Custom,” then press (SEEK) +.
4 Rotate the control dial to select “EQ3
Mode Tune,” then press the select
button.
5 Rotate the control dial to select the
desired frequency range from “LOW,”
“MID” or “HI,” then press the select
button.
6 Rotate the control dial to select the
center frequency you wish to adjust,
then press the select button.
Selectable frequency in each range:
LOW: 60 Hz or 100 Hz
MID: 500 Hz or 1.0 kHz
HI: 10.0 kHz or 12.5 kHz
7 Rotate the control dial to adjust the
equalizer curve.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
8 Press the select button.
Repeat steps 5 to 8 to adjust other frequency
ranges.
9 Press (BACK) or (SEEK) – twice.
The display returns to normal play/reception
mode.
To restore the factory-set equalizer curve,
select “EQ3 Mode Initialize” and “Yes” in
step 4.
Tip
Other equalizer types are also adjustable.
Adjusting setup items — MENU
1 Press and hold the select button.
The setup display appears.
2 Rotate the control dial until the
desired menu item appears, then
press the select button.
3 Rotate the control dial to select the
setting, then press the select button.
The setting is complete.
4 Press (BACK).
The display returns to normal play/reception
mode.
The following items can be set (follow the page
reference for details):
“z” indicates the default settings.
Setup
Display
Clock Adjust (page 5)
CT (Clock Time)
To set “on” or “off” (z) (page 13, 14).
Beep
To set “on” (z) or “off.”
RM (Rotary Commander)
To change the operative direction of the rotary
commander controls.
– “NORM” (
z): to use the rotary commander in
the factory-set position.
– “REV”: when you mount the rotary
commander on the right side of the steering
column.
AUX Audio
To turn the AUX source display “on” (
z) or
“off” (page 18).
Auto Off
To shut off automatically after a desired time
when the unit is turned off: “NO” (
z), “30 sec,”
“30 min” or “60 min.”
Demo
(Demonstration)
To set “on” (z) or “off.”
continue to next page t