Filter
Top Products
BUS AUDIO IN
/ AUX IN
SUB OUT
4
Supplied with XA-C30
BUS AUDIO IN
/AUX IN*
4
Source selector
XA-C30
2
6
7
4
ANT REM
7
Fuse (10 A)
Red
Yellow
Black
Blue
Blue/white striped
BUS
CONTROL IN
Supplied with the CD/MD changer
from car aerial
Light blue
Max. supply current 0.1 A
ATT
1
SUB OUT (MONO)
*
1
Orange/white striped
5
ILLUMINATION
*
3
*
2
*
1
RCA pin cord (not supplied)
*
2
Auxiliary optional equipment such as portable DVD player (not supplied)
*
3
supplied with the auxialiry equipment
*
4
Be sure to match the color-coded code for audio to the appropriate jacks from the unit.
If you connect an optional CD/MD unit, you cannot use AUX IN terminal.
3
AMP REM
Max. supply current 0.3 A
AUDIO OUT
FRONT
AUDIO OUT
REAR
*
1
Connection diagram (4)
1 To a metal surface of the car
First connect the black earth lead, then connect
the yellow and red power input leads.
2 To the power aerial control lead or power
supply lead of aerial booster amplifier
Notes
• It is not necessary to connect this lead if there
is no power aerial or aerial booster, or with a
manually-operated telescopic aerial.
• When your car has a built-in FM/MW/LW aerial
in the rear/side glass, see “Notes on the control
and power supply leads.”
3 To AMP REMOTE IN of an optional power
amplifier
This connection is only for amplifiers. Connecting
any other system may damage the unit.
4 To the interface cable of a car telephone
5 To a car’s illumination signal
Be sure to connect the black earth lead to it first.
6 To the +12 V power terminal which is energized
in the accessory position of the ignition key
switch
Notes
• If there is no accessory position, connect to the
+12 V power (battery) terminal which is
energised at all times.
Be sure to connect the black earth lead to it
first.
• When your car has a built-in FM/MW/LW aerial
in the rear/side glass, see “Notes on the control
and power supply leads.”
7 To the +12 V power terminal which is energised
at all times
Be sure to connect the black earth lead to it first.
Notes on the control and power supply leads
• The power aerial control lead (blue) supplies +12 V
DC when you turn on the tuner or when you
activate the AF (Alternative Frequency), TA (Traffic
Announcement) function.
• When your car has built-in FM/AM aerial in the
rear/side glass, connect the power aerial control
lead (blue) or the accessory power input lead (red)
to the power terminal of the existing aerial
booster. For details, consult your dealer.
• A power aerial without relay box cannot be used
with this unit.
Memory hold connection
When the yellow power input lead is connected,
power will always be supplied to the memory circuit
even when the ignition key is turned off.
•
•
•
•
•
•
•
•
1
2
9
1
TO
P
3
3
3
4
1
2
•
•
3
4
5
6
•
•
7
•
•
•