Filter
Top Products
23
Operating the Bluetooth
functions
1 Press .
The call menu appears.
2 Rotate the control dial until the desired
item appears, then press it.
3 Press (BACK)*.
The source returns to the Bluetooth
phone.
* For PAIRING, REDIAL, VOICE DIAL and BT
SIGNL settings, step 3 is not necessary.
The following items can be set:
*1 You can also select these items by pressing
and rotating the control dial to
select “BT.”
*2 Depending on the cellular phone, this unit’s
ringtone may be output even if set to “2
(cellular phone).”
*3 Appears on the setup menu when the unit is
turned off.
Pairing
The Bluetooth device (cellular phone, audio
device, etc.) and this unit need to be
“paired” before use between each other via
the Bluetooth function.
Tips
• For details on pairing for a Bluetooth device,
refer to the operating instructions supplied with
the device.
• You can pair up to 9 Bluetooth devices with this
unit.
1 Place the Bluetooth device within 1 m
(3 ft) of this unit.
2 Press and rotate the control
dial until “PAIRING” appears, then
press it.
The unit enters pairing standby mode.
3 Set the Bluetooth device to search for
this unit.
A list of detected devices appears in the
display of the device to be connected.
This unit is displayed as “Sony
Automotive” on the device to be
connected.
PAIRING*
1
(page 23)
PHONEBOOK (page 26)
REDIAL (page 27)
RECENT CALL (page 26)
VOICE DIAL (page 28)
DIAL NUMBER (page 27)
RINGTONE*
1
*
2
Selects whether this unit or the
connected cellular phone outputs the
ringtone: “1 (this unit)”- “2 (cellular
phone).”
AUTO ANS*
1
(Auto Answer)
Sets this unit to answer an incoming call
automatically: “OFF”-“1 (about 3
seconds)”-“2 (about 10 seconds).”
BT SIGNL*
1
(Bluetooth Signal) (page 24, 25)
BT INIT*
3
(Bluetooth Initialize) (page 30)
Flashing