Filter
Top Products
36
GB
When another device (PARTY host)
is having a PARTY, press PARTY.
The unit joins the PARTY as a PARTY guest
and the PARTY STREAMING indicator
lights up in amber.
To leave a PARTY
Press PARTY.
The PARTY STREAMING indicator goes off.
Notes
•An error has occurred when the PARTY
STREAMING indicator lights up in red. Perform
the process from step 1 again.
•The PARTY STREAMING indicator lights up in
amber when other devices utilizing the PARTY
STREAMING function invite this unit to a
PARTY. When you want to leave that PARTY,
press PARTY.
•You cannot join a PARTY in the following cases:
– you have a PARTY on this unit
– you have already joined in another PARTY
•If you press PARTY when no PARTY is being
held, but a device that complies with the PARTY
STREAMING function is playing, the device will
be the PARTY host and the unit will join the
PARTY as a PARTY guest.
To use the PARTY STREAMING
function with a Network Audio
Remote
You can use a Network Audio Remote that
supports the PARTY STREAMING function
to use the unit to start a PARTY that is being
held by other devices.
Updating software
When a new update is available, the UPDATE
indicator lights up in green while the unit is
connected to the Internet.
Check the following customer support website
about the update:
http://www.sony.net/sans
Notes
• Perform the following operations after confirm the
message and also read and agree the “END-USER
LICENSE AGREEMENT FOR SONY
SOFTWARE” (page 49).
• Make sure you do not attempt any of the following
operations while the update is in progress.
– Turning the unit off
– Connecting or disconnecting the network (LAN)
cable (not supplied)
– Disconnecting the AC adaptor
• About connecting the fixed IP address and setting
of the proxy server, display the Setting Screen on a
browser and set these referring to “Option
3:Manual setting method using an Access Point
Scan (for PC/Mac)” (page 22).
1 Quit all operations before
updating.
Tip
If you do not quit those, the unit will quit or
stop all operations automatically.
2 Press and hold the UPDATE
button on the side of SA-NS410
or the bottom of SA-NS310 until
the illumination is turned off.
The update starts.
The UPDATE indicator flashes during
the update.