Filter
Top Products
19
Selecting specific tracks
for playback
— Bank (For a CD unit with the custom file
function)
If you label the disc, you can set the unit to
skip or play the tracks of your choice.
1 Start playing the disc and press (SHIFT),
then press (3) (PLAY MODE) for two
seconds.
Bank edit mode.
Note
If you have not labeled the disc, the bank edit
mode does not appear. To go back to normal
playback mode, press (SHIFT).
2 Push the SEEK/AMS control up or down
to select the track number you want to
skip and press (5) (ENTER).
The indication changes from “PLAY” to
“SKIP.” To return the indication to
“PLAY,” press (5) (ENTER) again.
3 Repeat step 2 to set “PLAY” or “SKIP” for
all the tracks.
4 Press (3) (PLAY MODE) for two seconds.
The unit returns to normal CD playback
mode.
5 Press (SHIFT).
Notes
• You can set “PLAY” or “SKIP” for up to 24 tracks.
• You cannot set “SKIP” for all the tracks on a CD.
Playing specific tracks only
You can select:
•BANK-ON - to play the tracks with the
“PLAY” setting.
•BANK-INV (Inverse) - to play the tracks with
the “SKIP” setting.
1 During playback, press (SHIFT), then
press (3) (PLAY MODE) repeatedly until
“BANK” appears.
2 Press (4) (n) to repeatedly until the
desired setting appears.
z BANK-ON z BANK-INV z BANK-OFF
Playback starts from the track following the
current one.
3 Press (SHIFT).
To return to normal playing mode, select
“BANK-OFF“ in step 2 above.