Filter
Top Products
21
01US02CD-U.fm masterpage:Right
CDX-CA860X/CA850X
3-229-198-11(1)
Selecting the spectrum
analyzer
The sound signal level is displayed on a spectrum
analyzer. You can select a display for ten patterns
(A-1 to A-5 or B-1 to B-5), or the automatic
display mode where all the patterns appear.
1 Press (SOURCE) to select a source
(radio, CD, MD, or TV).
2 Press (MENU).
3 Press either side of (DISC) repeatedly
until “SA” appears.
4 Press either side of (SEEK) repeatedly
to select the desired setting.
5 Press (ENTER).
Labeling a Motion Display
You can label a Motion Display with up to 64
characters to appear when the unit is turned off.
Labels will scroll in the display in the M.Dspl 1
mode (the display remains lit even when the
power is off).
1 Press (OFF).
CD/MD playback or radio reception stops
(the display remains on).
2 Press (MENU), then press either side
of (DISC) repeatedly until “Name
Input” appears.
3 Press (ENTER).
4 Enter the characters.
1Press (DSPL) to select the character
type.
A t a t 0 t A
2Press the (+)*
1
side of
(DISC) repeatedly to select the
desired character.
A t B t C t ... x t y t z t 0 t 1
t 2 ... t ! t “ t # ... t *
2
t A
*1 For reverse order, press the (–) side of
(DISC).
*2 (blank space)
3Press the (+) side of (SEEK) after
locating the desired character.
If you press the (–) side of (SEEK), you
can move back to the left.
4Repeat steps 1 to 3 to enter the
entire sentence.
5 Press (ENTER).
Tips
• Simply overwrite or enter “” to correct or erase a
sentence.
• To erase all sentences, press (ENTER) for
2 seconds after step 3.