Filter
Top Products
24
Error displays/Messages
*1 When an error occurs during playback of a CD, the
disc number of the CD does not appear in the
display.
*2 The disc number of the disc causing the error
appears in the display.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
The “ST” indication flashes.
• Tune in the frequency accurately.
• The broadcast signal is too weak.
t Set to the monaural reception mode (page
19).
A programme broadcast in stereo is heard
in monaural.
The unit is in monaural reception mode.
t Cancel monaural reception mode (page
19).
RDS
The SEEK starts after a few seconds of
listening.
The station is non-TP or has weak signal.
t Press (AF) or (TA) repeatedly until “AF-
OFF” or “TA-OFF” appears.
No traffic announcements.
• Activate “TA.”
• The station does not broadcast any traffic
announcements despite being TP.
t Tune in another station.
PTY displays “--------.”
• The current station is not an RDS station.
• RDS data has not been received.
• The station does not specify the programme
type.
Error displays
The following indications will flash for about 5
seconds, and an alarm sound will be heard.
ERROR*
1
A CD is dirty or inserted upside down.*
2
t Clean or insert the CD correctly.
HI TEMP
The ambient temperature is more than 50°C.
t Wait until the temperature goes down
below 50°C.
RESET
The unit cannot be operated because of some
problem.
t Press the RESET button on the unit.
Messages
L.SEEK +/–
The Local Seek mode is on during automatic
tuning (page 11).
NO AF
There is no alternative frequency for the
current station.
“” or “”
You have reached the beginning or the end of
the disc and you cannot go any further.