Filter
Top Products
17
01US02CD-U.fm masterpage:Right
CDX-MP70
3-239-019-21 (1)
Storing only desired stations
You can manually preset desired stations.
1 Press (SOURCE) repeatedly to select
the radio.
2 Press (MODE) repeatedly to select the
band.
3 Press the –m or M+ button to tune
in the station that you want to store.
4 Press (MENU), then rotate the
./> control dial until “Preset
Edit” appears.
5 Press the ./> control dial.
6 Rotate the ./> control dial to
select the number that you want to
store.
7 Press the ./> control dial.
The stored station indication appears in the
display.
8 Press (MENU) twice.
Note
If you try to store another station on the same stored
number, the previously stored station will be erased.
Operating with the card remote
commander
1 Press (SOURCE) repeatedly to select
the radio.
2 Press (MODE) repeatedly to select the
band.
3 Press (SEEK -) or (SEEK +) to tune in
the station that you want to store.
4 Press the desired number button ((1)
to (6)) until “MEM” appears.
Storing station names
— Station Memo
You can assign a name to each radio station and
store it in memory. The name of the station
currently tuned in appears in the display. You can
assign a name using up to 8 characters for a
station.
Storing the station names
1 Tune in a station whose name you
want to store.
2 Press (MENU), then rotate the
./> control dial until “Name Edit”
appears.
3 Press the ./> control dial.
4 Enter the characters.
1Rotate the ./> control dial to
select the desired character.
A y B y C ... y 0 y 1 y 2 ... y
+
y – y
*
... y * y A
* (blank space)
2Press the M+ button after locating
the desired character.
If you press the –m button, you can
move back to the left.
3Repeat steps 1 and 2 to enter the
entire name.
5 Press the ./> control dial.
Tips
• Simply overwrite or enter “ ” to correct or erase a
name.
• There is another way to start storing station names:
Press (LIST) for 2 seconds instead of performing
steps 2 and 3. You can also complete the operation
by pressing (LIST) for 2 seconds instead of step 5.
• If no memory is remaining, “Mem Full” appears in
the display, and you cannot assign a station name.
./> control
dial
continue to next page t
00US+00COV-U.book Page 17 Friday, December 7, 2001 12:24 PM