Filter
Top Products
10
CDX-M7815X/M7810
2-586-657-11 (1)
H:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:Left
6 Press (ENTER) to move to the next
frequency.
The frequency changes as follows:
62Hz t 157Hz t 396Hz t 1.0kHz t
2.5kHz t 6.3kHz t 16kHz
Repeat steps 5 and 6 to adjust the equalizer
curve.
The confirmation dialog appears after
adjusting “16kHz” and pressing (ENTER).
7 Rotate the SEEK control dial to select
“YES,” then press (ENTER).
The setting is complete and the display
returns to normal play/reception mode.
To restore the factory-set equalizer curve, press
and hold (ENTER) in step 5 or 6, then rotate the
SEEK control dial to select “YES.”
With the card remote commander
In steps 2, 3 and 5: press M or m instead of the SEEK
control dial; in steps 4 and 7: press < or , instead
of the SEEK control dial; in step 6: press < or ,
instead of (ENTER).
Labeling a station/disc
When you receive a station, or play a disc in a
CD changer with the CUSTOM FILE function,
you can label each station/disc with a custom
name up to 8 characters (Station Memo/Disc
Memo).
If you label a station/disc, the name appears on
the list (page 9 or 12).
1 While receiving a station or playing a
disc that you want to label, press
(MENU).
2 Rotate the SEEK control dial until
“Edit” appears, then press (ENTER).
3 Rotate the SEEK control dial until
“Name Edit” appears, then press
(ENTER).
4 Rotate the SEEK control dial until the
desired character appears.
The character changes as follows:
A y B y C ... y 0 y 1 y 2 ... y +
y – y ... y (blank space) y A
To move the digital indication, press
(ENTER).
Repeat this operation until the entire name is
entered.
The confirmation dialog appears after
entering the far right character and pressing
(ENTER).
5 Rotate the SEEK control dial to select
“YES,” then press (ENTER).
The setting is complete and the display
returns to the normal reception/play mode.
To display the name, press (DSPL) during
reception/playback.
Tips
• To correct or erase a character, overwrite or enter
“.”
• The Disc Memo always takes priority over any
prerecorded title.
• You can label a disc on the unit if a changer with the
CUSTOM FILE function is connected.
• “REP-Track” and all shuffle play are suspended until
the labeling is complete.
With the card remote commander
In steps 2 to 4: press M or m instead of the SEEK
control dial; in step 4: press < or , to move the
digital indication; in step 5: press < or , instead of
the SEEK control dial.
Deleting the custom name
1 Select the radio, or the unit that has stored the
custom name you want to delete, then press
(MENU).
2 Rotate the SEEK control dial until “Edit”
appears, then press (ENTER).
3 Rotate the SEEK control dial until “Name
Delete” appears, then press (ENTER).
The stored name will appear.
4 Rotate the SEEK control dial to select the
name you want to delete.
5 Press (ENTER).
The confirmation dialog appears.
6 Rotate the SEEK control dial to select “YES,”
then press (ENTER).
The name is deleted, and “Continue” appears
if the other names are stored. If you want to
delete other names, rotate the SEEK control
dial to select “YES,” then repeat steps 4 to 6.
7 Press (MENU).
The unit returns to normal reception/play
mode.
With the card remote commander
In steps 2 to 4: press M or m instead of the SEEK
control dial; in step 6: press < or , instead of the
SEEK control dial.
Adjusting menu items — MENU
1 Press (MENU).
2 Rotate the SEEK control dial until the
desired menu item appears, then
press (ENTER).
The items changes as follows: