Filter
Top Products
25
Error displays/Messages
(when an optional CD/MD unit is connected)
*1 When an error occurs during playback of a CD or
MD, the disc number of the CD or MD does not
appear in the display.
*2 The disc number of the disc causing the error
appears in the display.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
Error displays
The following indications will flash for about 5
seconds, and an alarm sound will be heard.
BLANK*
1
No tracks have been recorded on an MD.*
2
tPlay an MD with recorded tracks on it.
ERROR*
1
• A CD is dirty or inserted upside down.*
2
tClean or insert the CD correctly.
• An MD does not playback because of some
problem.*
2
tInsert another MD.
• A CD/MD cannot play because of some
problem.
tInsert another CD/MD.
HI TEMP
The ambient temperature is more than 50°C
(122°F).
tWait until the temperature goes down
below 50°C (122°F).
NO DISC
No disc is inserted in the CD/MD unit.
tInsert discs in the CD/MD unit.
NO MAG
The disc magazine is not inserted in the CD/
MD unit.
tInsert the magazine in the CD/MD unit.
NO MUSIC
A CD which is not a music file is inserted in
the MP3 playable CD unit.
tInsert a music CD in the MP3 playable CD
unit.
NOTREADY
The lid of the MD unit is open or the MDs are
not inserted properly.
tClose the lid or insert the MDs properly.
RESET
The CD/MD unit cannot be operated because
of some problem.
tPress the RESET button on the unit.
Messages
L.SEEK +/–
The Local Seek mode is on during automatic
tuning (page 10).
“” or “”
You have reached the beginning or the end of
the disc and you cannot go any further.