Filter
Top Products
8
US
Tuning in by adjusting the
frequency
— Manual tuning
1 Select the desired band.
2 Press and hold either side of the SEEK/
MANU button.
Release the button when the desired station
is received.
PREVENT ACCIDENTS!
While driving, use the automatic tuning and
the memory preset tuning instead of the
manual tuning.
Memorizing stations
automatically
— Automatic memory function
Stations with the clearest reception are
automatically searched and memorized on
each band (FM1, FM2 and AM). Up to 6
stations on each band can be stored on the
preset number buttons 1 to 6 in the order of
band frequency.
1 Select the desired band.
2 Press the TUNER/A MEM button for more
than two seconds.
The unit will start scanning the selected
band and automatically memorize the
tuned stations on the preset number button
1 through 6.
FM1 t FM2 t AM t FM1
FM1 t FM2 t AM t FM1
Radio
Searching for stations
automatically
— Automatic tuning
1 Select the desired band.
2 Press either side of the SEEK/MANU
button momentarily to search for the
next station (automatic tuning).
The scanning stops when a station is received.
Press either side of the button repeatedly until
the desired station is received.
When an FM stereo program with a sufficient
signal strength is tuned in,
To avoid the automatic tuning from stopping on
stations too frequently, press the LOCAL button
momentarily to get the “LCL” indication (local
seek mode).
Only the stations with relatively strong signals will
be tuned in. The local seek mode functions only
when the automatic tuning is in operation.
the “STEREO” indication will appear.
FM1 t FM2 t AM t FM1
For lower
frequencies
For higher
frequencies
A MEM
TUNER
SEEK
MANU
A MEM
TUNER
For lower
frequencies
For higher
frequencies
SEEK
MANU
A MEM
TUNER
A MEM
TUNER