Filter
Top Products
8
US
Other Functions
Adjusting the sound
characteristics
1 Select the item you want to adjust by
pressing the
SEL
button repeatedly.
VOL (volume) n BAS (bass) n TRE
(treble) n BAL (balance) n FAD (fader)
n VOL (volume)
2 Adjust the selected item by pressing
either the or button.
Adjust within three seconds after selecting.
(After three seconds the button will again
serve as volume control button.)
Enjoying bass and treble
at low volume
— Loudness Function
Press the
LOUD
button. n “LOUD” will
appear on the display.
Bass and treble will be boosted. To cancel,
press again.
Attenuating the beep
tone
Press the
5
button while pressing
the
SEL
button.
To reactivate the beep tone, press these buttons
once more.
Memorizing only the
desired stations
1 Select the desired band.
2 Tune in the station which you wish to
store on the preset number button.
3 Press and hold the desired preset
number button (
ATA
1
to
6
) for about
two seconds until you hear a beep tone.
The number of the pressed preset number
button appears in the display window.
Up to 6 stations on each band (FM1, FM2 and AM)
can be stored on the preset number buttons in the
order of your choice. Therefore, 12 stations can be
memorized on FM.
If you try to store another station on the same
preset number button, the previously stored
station will be erased.
Receiving the memorized
stations
1 Select the desired band.
2 Press momentarily the preset number
button on which the desired station is
stored.
Note
If you press the preset number button for more
than two seconds, the currently received station
will be memorized. To receive the previously
memorized station, make sure that the preset
number button is pressed only momentarily.
FM
ST
FM1 n FM2 n AM n FM1
FM1 n FM2 n AM n FM1
TUNER
A MEM
TUNER
A MEM