Filter
Top Products
10
EN
Actual total number Sony XR-3690RDS (E,F,G,I) 3-810-679-12 (2)
Presetting the RDS
Stations with the AF and
TA Data
When you preset the RDS stations, the unit
stores each station’s data as well as its
frequency, so you don’t have to turn on the AF
or TA function every time you tune in the
preset station. You can select different setting
(AF, TA, or both) for individual preset station
or the same setting for all preset stations.
Presetting the same setting for all
preset stations
1 Select an FM band.
2 Press the
AF/TA
button repeatedly and
select either “AF ON, “ “TA ON,” or “AF/
TA ON”(for both AF and TA functions).
Note that selecting “AF/TA OFF” stores
not only RDS stations, but also non-RDS
FM stations.
3 Press the
PTY
BTM
button for two
seconds.
Presetting different settings for
each preset station
1 Select an FM band and tune in the
desired station.
2 Press the
AF/TA
button repeatedly and
select either “AF ON, “ “TA ON,” or “AF/
TA ON”(for both AF and TA functions).
3 Press the desired preset number button
for two seconds until a beep sounds.
Repeat from step 1 for presetting other
stations.
Tip
If you want to change the preset AF and/or TA setting
after you tuned in the preset station, you can do so by
turning on/off the AF or TA function.
Locating a Station by
Programme Type
You can locate the station you want by
selecting one of the programme types shown
below.
Note
In the countries or regions where EON data is not
transmitted, you can use this function only for the stations
you have tuned in once.
Display
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
M.O.R. M
LIGHT M
CLASSICS
OTHER M
NONE
Programme types
News
Current Affairs
Information
Sports
Education
Drama
Culture
Science
Varied
Popular Music
Rock Music
Middle of the Road Music
Light Classical
Classical
Other Music Type
Not specified
Note
You cannot use this function in some countries where no
PTY (Programme Type selection) data is available.
1 Press the
PTY
BTM
button during FM
reception until “PTY” lights up in the
display.
The current programme type name appears
if the station is transmitting the PTY data.
“- - - - -” appears if the received station is
not an RDS station or if the RDS data has
not been received.
2 Press the
PTY
BTM
button repeatedly until
the desired programme type appears.
The programme types appear in the order
as shown in the above table. Note that you
cannot select “NONE” (Not specified) for
searching.
SPORT
INFO