Filter
Top Products
Actual total number
Sony XR-3304(E,Ar) 3-858-021-22 (1)
8
EN
Other Functions
Adjusting the Sound
Characteristics
1 Select the item you want to adjust by
pressing the
SEL
button repeatedly.
BAS (bass) n TRE (treble) n BAL
(balance) n FAD (fader) n VOL (volume)
n BAS (bass)
2 Adjust the selected item by pressing
either the or button.
Adjust within three seconds after selecting.
(After three seconds the buttons will again
serves as the volume control buttons.)
Enjoying Bass and Treble
at Low Volume
— Loudness Function
Press the
SENS
LOUD
button for more than two
seconds. n “LOUD” will appear on the
display.
The bass and treble are boosted. To cancel,
press again.
Maintenance
Fuse Replacement
When replacing the fuse, be sure to use one
matching the amperage rating stated on the
fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse
blows again after replacement, there may be an
internal malfunction. In such a case, consult
your nearest Sony dealer.
Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit as
this could damage the unit.
Cleaning the Connectors
The unit may not function properly if the
connectors between the unit and the front
panel are not clean. In order to prevent this,
open the front panel by pressing the RELEASE
button, then detach it and clean the connectors
with a cotton swab dipped in alcohol. Do not
apply too much force. Otherwise, the
connectors may be damaged.
Fuse (10 A)
Main unit
Back of the front panel