Filter
Top Products
21
Presetting DAB services
manually — Manual Preset Memory
You can also preset DAB services manually or
delete a service which is already preset. Note
that up to 40 services (preset either by the BTM
function or manually) can be preset to the
unit’s memory.
1 While listening to a DAB programme,
press (MENU).
2 Press either side of (PRST/DISC)
repeatedly until “PresetEdit” appears,
then press (ENTER).
3 Select the service and the preset number
you want to preset.
1 Press either side of (SEEK/AMS) to
select the service.
2 Press either side of (PRST/DISC) to
select the preset number.
3 Press (ENTER).
4 Press either side of (PRST/DISC) to select
“Over Wrt.”
Each time you press (–) side of
(PRST/DISC), the edit command changes as
follows:
Over Wrt t Insert* t Delete t Over Wrt
* “Insert” does not appear if the maximum
number of services (40) is already preset in
memory.
To preset other services, repeat steps 3 and
4.
5 Press (ENTER).
Replacing the services in preset
memories
Press either side of (PRST/DISC) to select
“Over Wrt” in step 4, then press (ENTER).
Adding the services in preset
memories
Press either side of (PRST/DISC) to select
“Insert” in step 4, then press (ENTER).
Erasing the services in preset
memories
Press either side of (PRST/DISC) to select
“Delete” in step 4, then press (ENTER).
Tip
There is another way to preset the service.
After receiving the service, press the number
button ((1) to (6)) until a beep sounds.