Sony XR-C300 Car Stereo System User Manual


 
13
Actual total number: Sony XR-C300 (E) 3-810-043-31 (2)
EN
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
8␣ watts per channel minimum continuous average power into
4␣ ohms, 4 channels driven from 20 Hz to 20 kHz with no more than
1% total harmonic distortion.
Other Specifications
Cassette player section
Tape track 4-track 2-channel stereo
Wow and flutter 0.08 % (WRMS)
Frequency response 30 – 18,000 Hz
Signal-to-noise ratio 58 dB
Tuner section
FM
Tuning range 87.5 – 107.9 MHz
Antenna terminal External antenna connector
Intermediate frequency 10.7 MHz
Usable sensitivity 8 dBf
Selectivity 75 dB at 400 kHz
Signal-to-noise ratio 65 dB (stereo),
68 dB (mono)
Harmonic distortion at 1 kHz
0.5 % (stereo),
0.3 % (mono)
Separation 35 dB at 1 kHz
Frequency response 30 – 15,000 Hz
Capture ratio 2 dB
AM
Tuning range 530 – 1,710 kHz
Antenna terminal External antenna connector
Intermediate frequency 10.71 MHz/450 kHz
Sensitivity 30 µV
Power amplifier section
Outputs Speaker outputs
(sure seal connectors)
Speaker impedance 4 – 8 ohms
Maximum power output 25 W × 4 (at 4 ohms)
General
Outputs Line out (1)
Power antenna relay
control lead
Power amplifier control
lead
Tone controls Bass ±8 dB at 100 Hz
Treble ±8 dB at 10 kHz
Power requirements 12 V DC car battery
(negative ground)
Dimensions Approx. 188 × 58 × 177 mm
(7
1
/2 × 2
3
/8 × 7 in.)
(w/h/d)
Mounting dimension Approx. 182 × 53 × 155 mm
(7
1
/4 × 2
1
/8 × 6
1
/8 in.)
(w/h/d)
Mass Approx. 1.2 kg (2 ib. 10 oz.)
Supplied accessories Parts for installation and
connections (1 set)
Front panel case (1)
Optional accessories Bus cable (supplied with
an RCA pin cord)
RC-61 (1 m), RC-62 (2 m)
RCA pin cord
RC-63 (1 m), RC-64 (2 m),
RC-65 (5 m)
Optional equipment Rotary commander
RM-X2S
Source selector XA-U20
Design and specifications are subject to change without
notice.