Filter
Top Products
14
EN
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
4800: 13␣ W/C5100: 17 W per channel minimum continuous
average power into 4␣ ohms, 4 channels driven from 20 Hz to 20
kHz with no more than 1% total harmonic distortion.
Cassette player section
Tape track 4-track 2-channel stereo
Wow and flutter 0.08 % (WRMS)
Frequency response 30 – 18,000 Hz
Signal-to-noise ratio 58 dB
Tuner section
FM
Tuning range 87.5 – 107.9 MHz
Antenna terminal External antenna connector
Intermediate frequency 10.7 MHz
Usable sensitivity 9 dBf
Selectivity 75 dB at 400 kHz
Signal-to-noise ratio 65 dB (stereo),
68 dB (mono)
Harmonic distortion at 1 kHz
0.7 % (stereo),
0.4 % (mono)
Separation 35 dB at 1 kHz
Frequency response 30 – 15,000 Hz
AM
Tuning range 530 – 1,710 kHz
Antenna terminal External antenna connector
Intermediate frequency 10.71 MHz/450kHz
Sensitivity 30 µV
Power amplifier section
Outputs Speaker outputs
(sure seal connectors)
Speaker impedance 4 – 8 ohms
Maximum power output 40 W × 4 (at 4 ohms)
(for XR-C5100)
35 W × 4 (at 4 ohms)
(for XR-4800)
General
Outputs Power antenna control
lead/Power amplifier
control lead
Rear line out (1)
Tone controls Bass ±8 dB at 100 Hz
Treble ±8 dB at 10 kHz
Power requirements 12 V DC car battery
(negative ground)
Dimensions Approx. 188 × 58 × 181 mm
(7
1
/
2
× 2
3
/
8
× 7
1
/
4
in.)
(w/h/d)
Mounting dimensions Approx. 182 × 53 × 164 mm
(7
1
/
4
× 2
1
/
8
× 6
1
/
2
in.)
(w/h/d)
Mass Approx. 1.2 kg (2lb. 10oz.)
Supplied accessories Parts for installation and
connections (1 set)
Front panel case (1)
Optional accessories Rotary commander
RM-X4S
Optional accessories Bus cable (supplied with
(for XR-C5100) an RCA pin cord)
RC-61 (1 m), RC-62 (2 m)
Optional equipment CD changer
(for XR-C5100) CDX-605 (10 discs),
CDX-T60 (6 discs),
CDX-T62 (6 discs),
MD changer
MDX-62
Source selector XA-C30
Design and specifications are subject to change without
notice.