Filter
Top Products
22
Changing the sound and
display settings
The following items can be set:
•CLOCK (page 9).
•CT (Clock Time) (page 19).
•BEEP – to turn the beep sound on or off.
•RM (Rotary Commander) – to change the
operative direction of the rotary commander.
— Select “NORM” to use the rotary
commander as the factory-set position.
— Select “REV” when you mount the rotary
commander on the right side of the
steering column.
•D.INFO (Dual Information)*
1
– to display the
clock and the play mode simultaneously
(ON), or to display the information
alternately (OFF).
•AMBER/GREEN*
2
– to change the
illumination colour to amber or green.
•DIMMER*
3
– to change the brightness of the
display.
— Select “ON” to dim the display.
— Select “OFF” to deactivate Dimmer.
•M.DSPL (Motion Display) – to turn the
motion display on or off.
•A.SCRL (Auto Scroll)*
4
(page 24).
1 Press (MENU).
2 Press either side of (PRST/DISC) or
(PRST) repeatedly until the desired item
appears.
Each time you press (–) side of (PRST/DISC)
or (PRST), the item changes as follows:
CLOCK t CT t BEEP t RM t D.INFO*
1
t
AMBER/GREEN*
2
t DIMMER*
3
t M.DSPL t
A.SCRL*
4
*
1
When the radio is off, or when no tape, CD,
or MD is playing, this item will not appear.
*
2
XR-C5300R/C5200R/4300R/4200R only
*
3
XR-C5300RV/4300RV only
*
4
When no CD or MD is playing, this item will
not appear (XR-C5300RX/C5300RV/C5300R/
C5200R only).
Note
The displayed item will differ depending on the
source.
Tip
You can easily switch among categories (“SET”,
“DIS”and “P/M”) by pressing an holding either side
of (PRST/DISC) or (PRST) for two seconds.
3 Press (+) side of (SEEK/AMS) to select the
desired setting (Example: ON or OFF).
4 Press (ENTER).
After the mode setting is complete, the
display returns to normal playback mode.