Filter
Top Products
24
EN
Notes
• If you press a number button during programme
memory play, programme memory play is
interrupted, and playback of the selected disc
starts.
• “NO Data” appears in the display if no track is
stored in the programme.
•If a track stored into the programme memory is
not in the disc magazine, the track will be
skipped.
•When the disc magazine contains no tracks
stored into the programme memory, or when
the programme information has not been loaded
yet, “Not ready” appears.
Erasing an entire programme
1 Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
“P 1” shows Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display “P 1” above.
2 Press (2) (N) repeatedly until “DEL”
appears.
To erase Programme 2, press (5) (n)
repeatedly until “PGM 2” appears.
3 Press (6) (ENTER) for two seconds.
The entire programme is erased.
4 When you finish erasing programmes,
press (4) (PLAY MODE) for two seconds.
5 Press (SHIFT).
5 When you finish entering tracks, press
(4) (PLAY MODE) for two seconds.
6 Press (SHIFT).
Notes
•“**Wait**” appears in the display while the unit
is reading the data, or when a disc has not been
put into the unit.
•“*Mem Full*” appears in the display when you
try to enter more than 12 tracks into a
programme.
Playing the stored programme
Changing the disc order in the unit will not
affect programme memory play.
You can select:
•PGM 1 to play Programme 1.
•PGM 2 to play Programme 2.
•PGM 1+2 to play Programmes 1 and 2.
1 Press (SHIFT).
2 Press (4) (PLAY MODE) repeatedly until
“PGM” appears.
3 Press (5) (n) repeatedly until the
desired programme appears.
Programme 1 playback
µ
Programme 2 playback
µ
Programmes 1 and 2 playback
µ
Normal playback
Programme Play starts.
4 Press (SHIFT).
To go back to normal playback mode, select
“PGM off” in step 3 above.
PGM
1
PLAYMODE
PGM
2
PLAYMODE
PGM
1+2
PLAYMODE
PLAYMODE
PLAY
DISC TRACK
MODE ENTER
PLAYMODE ENTER
PLAYMODE ENTER