Filter
Top Products
7
EN
Caution alarm
If you turn the ignition key switch to the OFF
position without removing the front panel, the
caution alarm will beep for a few seconds
(only when the POWER SELECT switch on the
bottom of the unit is set to the A position).
TIR indicator
If you pull out the ignition key while the TIR
function is on, the TIR indicator flashes a few
times. (only when the POWER SELECT switch
on the bottom of the unit is set to the A
position).
For more information on the TIR function,
refer to “Recording the traffic announcements”
(page 15).
Preparing the rotary
commander
When you mount the rotary commander,
attach the labels as shown in the illustration
below.
Setting the clock
The clock uses a 24-hour digital indication.
Example: To set the clock to 10:08
1 Press (SHIFT), then press (3) (SET UP).
1 Press (5) (n).
The hour digit flashes.
2 Set the hour.
3 Press (5) (n).
The minute digits flash.
4 Set the minute.
to go forward
to go backward
to go forward
to go backward
SET UP
SET UP
SET UP
SET UP
SET UP
SET UP
continue to next page n
TIR indicator
Getting Started
REC
r
PLAY
(
TALK
VOICE
MEMO
SOUND
MODE
LIST
rREC
(
PLAY
TALK
VOICE
MEMO
LIST
MODE
SOUND