Filter
Top Products
22
PTY (Program Type)
1. Press PTY/CLK button on the panel to activate the PTY function. The previous PTY type is
shown.
2. Press PTY/CLK once again to enter the MUSIC type or press twice to enter the SPEECH
type, then use buttons 1 - 6 to select the desired program type (see the following
table).
3. When PTY is selected, the radio starts to search corresponding PTY information, and
stops if the corresponding PTY information is detected.
4. If there are no keys entered for 2 seconds, previously selected PTY is searched. During 1
loop, if desired PTY is not found, NO PTY is flashed, then return to previous normal radio
and PTY word disappears.
5. Press PTY button for the 3
rd
time to switch the PTY function off.
Press SEL button for 2 seconds to enter the menu mode. Press it repeatedly to choose the
needed item: TA SEEK/ALARM => RETUNE L/S => MASK DPI/ALL.
TA (Traffic Announcement) mode
To determine what action will the radio take if the newly tuned station does not receive
TP (Transport Program) information for 5 seconds. Rotate the VOL knob to select the
desired mode: TA ALARM and TA SEEK.